# Monday Briefing — Current State **2026-05-11 10:15 AM · Clean / no stale data** > Trial day for phone-driven workflow. Sam's home, Win at school, v3.2 print file ready, going to Jon and Abbey's after print starts. --- ## Confirmed truth as of 10:15 AM | Item | Status | |---|---| | Sam | Home, ready to start print and head to Jon and Abbey's | | Win | At school via bus this morning, pickup 4:20 PM | | CeCe | Scheduling dog boarding, 6 PM follow-up tonight | | Pirates v3.2 file | ✅ READY from print chat, in Downloads | | Print queue | About to start first v3.2 print | | Peter Scott | TUESDAY 5/12 appointment (time TBD), NOT today | | Jon Aceves (Jonathon for formal records) | Today's paint work | | Substrate hub | Updating to current truth via Claude Code | --- ## Pirates v3.2 — APPROVED to print Print chat delivered with the same fix pattern as Phillies v3.1 (which printed perfectly first time). Verified verdict: **start your first v3.2 print as proof-of-concept**, then queue the rest. **Key improvements:** - Pause 1: z=10.0 → z=10.2 (fires AFTER layer 50, no more off-by-one) - Pause 2: z=12.0 → z=12.2 (same fix for layer 60) - Print time: ~143 min → ~129 min per piece (saves ~14 min each) - Weight: ~93g → ~84g per piece (saves ~9g each) - Across 8 pieces: ~115 min and ~73g saved **Discipline rule:** Print ONE Pirates first as proof of concept. If clean, queue the rest. If problems, stop and message me. **Bed plate care:** Wash with soap and warm water after ~5 prints, or immediately if first layer adhesion looks off. Probably one wash mid-queue today. No IPA for daily cleaning. --- ## Today's flow (10:15 AM forward) ### Now → 10:30 AM - Open Pirates v3.2 in Bambu Studio - Let it re-slice - Visual confirmation: pause markers at layers 51 and 61 - Load white PLA - Click print - Pack paint + spatter cleanup kit ### Print start +0 → +85 min (~10:30 AM-12:00 PM) - Walk to Jon and Abbey's - Vacuum + walk-through (10-15 min — what Jon mentioned: outside wall lighter check, photo it) - Start first paint task: fan medallion black OR start ceiling cut-in - Be back home by 11:50 AM to be safe for pause 1 ### Pause window at home (~12:00-12:20 PM) - Pause 1 swap (white→black) — ~5 min - Wait ~13 min for layer 60 to complete - Pause 2 swap (black→gold) — ~5 min - Stay home, this 30 min is the irreducible babysitting window ### +120 min print done (~12:30 PM) - First v3.2 proof complete - INSPECT carefully — layer boundaries clean? - If clean: start second print, queue continues - If problems: stop, message me, debug ### Second print run (~12:30-2:40 PM) - Same pattern - More work at Jon's during the 85 min before pause 1 - Lunch sometime in here ### Third print attempt if time/energy (~3:00-4:15 PM) - Optional — depends on how Jon's work is going ### 4:20 PM — Win pickup - Stop all work - Phone alarm at 4:10 PM - Get Win from school ### 6:00-7:00 PM — CeCe conversation **Topics:** 1. **Dog vet records** — current for boarding? (rabies, bordetella, distemper typical requirements) 2. **Wedding outfit** — what's needed (rent, buy, own), when 3. **Wedding logistics** — date, time, location, transport 4. **Boarding details** — Megan vs Club Pet, drop-off and pickup times ### 7:00-8:00 PM — Planning chat check-in - Trial day debrief - Build SS-Q010 quote for Jon's paint work in manage app - Tomorrow's plan (includes Peter Scott appointment) - Apply Jonathon name correction in manage app ### 9:00 PM — Sleep - 10-hour target. You're owed it after last night's 3 hours. --- ## Jon and Abbey's — remaining paint work **From your conversation this morning:** | Task | Time | Notes | |---|---|---| | Cut in ceiling | 60-90 min | Priority, needs to dry | | Paint fan medallion black | 15-20 min | 1" brush, oil enamel black | | Paint 2 doors (color = baseboard covers) | 45-60 min each + dry | Need to verify exact color | | Paint door trim (same baseboard color) | 30 min | | | Vacuum radiator (no steam clean) | 5 min | Jon's preference confirmed | | Paint radiator | 30-45 min | Brush technique for fins | | Spatter cleanup — treadmill | 15-30 min | See method below | | Spatter cleanup — chest | 15-30 min | See method below | | Diagnose "lighter" outside wall | 15 min | Photo only today, fix Tuesday | | Touch-up survey | 30 min | Notepad + flashlight | **Total: 4-6 hours remaining. Realistic completion: Monday + Tuesday.** --- ## Paint roller spatter — cleanup methods ### Treadmill (painted metal + plastic) **Escalation order:** 1. **Warm soapy water + plastic scraper** (5-10 min soak, plastic putty knife or expired credit card) 2. **70% rubbing alcohol** on cotton ball if water fails (TEST hidden spot first) 3. **Goof Off** last resort (TEST first, NOT on ABS plastic) **NEVER on treadmill:** Acetone, lacquer thinner, razor blades, mineral spirits on plastic ### Wood chest **Escalation order:** 1. **Warm soapy water + soft cloth** (5-10 min soak) 2. **Hot vinegar or rubbing alcohol** if water fails (TEST first) 3. **Plastic scraper** (expired credit card) — NEVER metal 4. **Goof Off** last resort (TEST first) **NEVER on wood:** Acetone, sandpaper, razor blades, paint stripper **Kit to pack:** - 4-6 microfiber cloths - Plastic putty knife or expired credit cards - Spray bottle with warm water + drop of dish soap - 70% rubbing alcohol (small bottle) - Goof Off (just in case) - Cotton swabs for tight spots **If anything looks risky:** Stop, leave a note, come back with different supplies. Better than damage. --- ## "Lighter wall" — diagnose only today Jon mentioned outside wall looks slightly lighter. **Today: document, don't fix.** 1. Photo in sunlight + photo in shade 2. Close-up texture photo 3. Find Jon's leftover paint can (brand, color code, sheen) 4. Ask if there were prior touch-ups (different batch?) 5. Note for Tuesday: feather in with leftover or need new can? --- ## Pricing Jon — SS-Q010 quote tonight **Rate range:** - Friend: $50-60/hr - Standard: $65-75/hr ← **recommended** - Premium: $85-100/hr **Quote structure:** - Hours × $65-75 - Materials at cost or +15% - Discount line if you give one (be explicit) **Build in manage app tonight 7-8 PM.** --- ## Manage app work queued tonight - Update customer name to Jonathon Aceves (formal records) - Verify aceves-home + aceves-lake customer IDs - Create Peter Scott customer record (for Tuesday) - Create SS-Q009 — Peter Scott shed releveling (after Tuesday appt) - Create SS-Q010 — Jonathon paint work to date - Log work record H-022 for today --- ## Trial day data — message me Quick status updates throughout the day help me debrief tonight: - **Print start:** "v3.2 print #1 started at [time]" - **Pause hits:** "Pause 1 done" / "Pause 2 done" - **Print done:** "Print #1 done, looks [good/issue]" - **At Jon's:** "Cut in done" / "Doors coat 1" / etc. - **Spatter:** Photo of trickiest spot if you want guidance - **End of day:** "Trial day done" No replies needed unless you ask. Just data points. --- ## Send order 1. **Already done:** Pirates v3.2 file from print chat ✅ 2. **Send now:** Updated Claude Code prompt (commits this briefing + corrections + v3.2 file) 3. **Start print** when ready in Bambu Studio You're on track. Trial day going well so far.